A Bahamas cleaning service in paradise

Category: Area Rug Cleaning

Daily Cleaning Tasks That Will Change Your Home

If you want to start your daily cleaning routine, you should start with the daily
tasks. In order to introduce the daily routine into your life, all you need is time. It
is not an easy task. However, it is not that difficult.
When you start introducing your daily cleaning routine, you will find the process
overwhelming. In addition, when you add too many tasks, it will be
overwhelming.
The most important thing about daily routine is persistence. If you feel that your
home is always in chaos, following this guide will help you to limit this chaos and
keep your home as clean as possible.
Before starting this routine, make sure to follow these instructions.
• Start with just a task each week then add another task each week. For example,
make beds each week then wipe counters and make beds the next week and so
on.
• If you can, start with making beds on Sunday, and add another task each day.
• If you already have a daily routine, this daily routine may break your routine and
make you try something different.

Making Beds:

Start with making your bed daily. All it takes is a minute and you will have a semi-
clean room. Beds are usually the centers of our rooms.
Your kids should learn how to make their beds too. This will make your job easier
and will teach your kids how to be independent.

Check Floors:

Regarding floors, follow these points.
• Do a quick sweep daily for a different part of the house.
• Vacuum to add a little touch up if you want.
• It is not about deep cleaning. The task should not take more than 10 to 15
minutes.
• Your kids should share in the cleaning process. Assign them areas to sweep or
vacuum daily. • We usually assign the kids easy areas; mostly their rooms.

Wipe Counters:

One of the best daily cleaning activities to add to your routine is wiping down
surfaces after each meal.
• The bathroom counters usually need your attention and giving them a quick
wipe daily if they need would be great.
• Keep the bar mop towels in an easy-access place to be able to wipe surfaces
down quickly.
• It is better not to go to sleep with a sink full of dishes and/or dirty counters.
• A daily kitchen cleaning routine is part of wiping counters.
Add other activities such as laundry to your routine. Keep adding/removing tasks
according to your needs until you find the best routine for yourself and your
home.

How to properly remove muddy carpet footprints?

In this article, we will explain a process with the help of which the readers can clean muddy carpet footprints in an effective manner. In buildings where children are present, muddy carpet footprints are a major problem as they are not aware of the safety standards of dealing with carpets. Muddy carpet footprints can affect the look of the carpet and they can become sticky in case the process of cleaning them is not performed immediately. Therefore, we recommend that the users should perform the process immediately by following the procedure explained in this article.

Supplies required to perform the process of carpet cleaning

In order to perform the process in an effective manner, the users will require a few supplies. It is more effective to remove the muddy footprints with the help of steam or hot water carpet cleaning process. However, in such cases, the users will have to obtain the services of professionals. Nonetheless, we will explain a process that users can perform with home available supplies. Some of the supplies required are as follows:

  1. Vacuum cleaner: This will help in removing soil particles from the carpet. In case, the vacuum cleaner is not available then a broom or duster can also carry out a decent job.
  2. Cleaning agent and spray bottle: An appropriate cleaning agent depending upon the material of the carpet will be required for performing the process in an effective manner. We recommend performing the process with the help of vinegar, which is an effective natural cleaner and does not negatively react with carpet material in most cases. Similarly, we recommend storing the cleaning services agent in a spray bottle so that it is more convenient to apply it on the affected areas.

Steps involved in the process

The process of removing muddy carpet footprints should be performed with extra care as some types of soils can also leave permanent stains on the carpet. The steps involved in the process are as follows:

  1. In the first step, vacuum cleans the area with the help of a vacuum cleaner. Perform the vacuuming process slowly so that it is able to suck mud particles in an effective manner.
  2. Now apply lukewarm water on the affected area so that it is more convenient to apply the cleaning agent.
  3. Rub the area gently with the help of a cleaning cloth and continue the process until the muddy stains start to come off.
  4. Let the carpet dry properly afterward.

How to Perform the Toilet Cleaning Process?

How to Perform the Toilet Cleaning Process

Toilet Cleaning is one of the essential chores that need to be performed on a routine basis. The toilet is one of those areas in the home or office that require special cleaning since microbial can grow and spread here quickly due to the prevalent favorable conditions. The microbial nourishing in toilets can spread to other parts of the building as well after coming in touch with the residents causing an unwholesome living environment in the building. Therefore, the temperature and humidity in toilets need to be properly managed in order to ensure healthy and hygienic living conditions in the building. A proper toilet cleaning process should be performed regularly in addition to basic daily general cleaning. In this article, we will describe a step-to-step procedure for performing the toilet cleaning process.

Supplies required for the toilet cleaning process

Some of the essential tools that will be required to perform the cleaning process are as follows:

  1. Toilet Brush: It will be used to remove the sticky and hard stains as well as dislodge the microbial that are firmly attached to the toilet floor. Toilet brush will restore the originality of the floor and give it a clean look.
  2. Sanitary Wipes: These are disposal wipes that can help in cleaning the toilet floor and removing the hard stains.
  3. Cleaning Rags: These are used to wipe and dry the area after applying water and cleaning agent. A number of different kinds of rags area available such as a towel or paper rags.
  4. Cleaning Agent: One of the most important supplies is a cleaning agent that will perform the action of removing stains and killing off the microbial. A high-functioning and good quality- cleaning services agent should be used in an appropriate amount.
  5. Sanitary Kit: The worker should use a sanitary kit for personal protection during the cleaning process. Gloves, cleaning apron and gloves should be worn at all times during the toilet cleaning process.

Procedure for Performing the Cleaning Process

The systematic way of performing toilet cleaner is described as below:

  1. In the first step, the worker needs to gather the supplies needed to perform the process.
  2. Now, apply the hot water to the parts of the toilet that you need to clean. Hot water can come handy in removing hard stains from the toilet floor.
  3. With the help of a toilet brush, scrub or a sponge, wipe the areas of the toilet that need cleaning. Keep rubbing these areas until the stains are cleaned.
  4. In case the stains do not come off on rubbing then apply the cleaning agent. The cleaning agent will not only help remove the stains but also kill off the microbial. Properly apply the cleaner to all parts and scrub with the help of the toilet brush.
  5. Once the scrubbing has been completed, flush the toilet or apply water to the scrubbed areas. This will clean the dirt and filth removed during the scrubbing as well as the cleaning agent residue.
  6. Clean the external areas and lid of the toilet with the help of water and the cleaning agent. The washroom floor should also be cleaned for complete cleaning.
  7. Dry all parts after the cleaning process has been completed.
  8. Ensure that the washroom is properly ventilated in order to control temperature and humidity.

How to Clean Granite?

How to Clean Granite

There are a number of methods commonly used to clean granite-manufactured items, however, not all of them are as effective and some of them can even prove to be counterproductive. Granite material is used in the manufacturing of countertops, flooring, etc. in both commercial and residential buildings. They can become soiled and stained over the course of time due to which the process to clean granite needs to be performed on a regular basis. In this article, we will explain a process with the help of which people can clean granite items at home without damaging the quality of the material.

Necessary precautions before performing the granite cleaning process

There are some precautions that need to be considered before performing the granite cleaning process as the material can get damaged in case the precautions are not properly upheld. Two significant precautions are as below:

  1. It is important to make sure that the granite surface is properly sealed before performing the process. In case, granite is not properly sealed then the water can seep through the surface of the material and damage it from inside. A number of tests are available which can test whether granite is properly sealed. These tests should be performed before performing the process to clean granite.
  2. We recommend using cleaners, which do not negatively react to granite material. People tend to use some natural cleaners such as vinegar, which can damage granite material and reduce its quality. The use of harsh commercial cleaners can also damage the surface of the material.

Steps involved in performing the granite cleaning process

The process to clean granite can be easily performed by anyone at home. Following steps can be
followed in order to perform the granite cleaning process, however, it is also important to consider the
precautions mentioned above.

  1. Use a dedicated cleaner for cleaning granite surfaces or prepare a cleaning solution of baking soda or hydrogen peroxide, which is effective in cleaning the material.
  2. Now rinse the granite material with the help of water so that dirt and other removable residues come off.
  3. Now apply the carpet cleaning solution on the surface of the material.
  4. Rub the surface of the material with the help of soft microfiber cloth in order to remove stains and spillage marks from the surface of the material.
  5. Continue the process to clean granite until all the stains and spillages start to disappear.
  6. Let the granite surface dry in the end.